Collection: Toyota Land Cruiser 70 2007-2024 Phone Mounts

OK let me start by saying that I am a frugal spender. I will however pay more for something if there is a significant quality and/or design advantage. I honestly would never have found this phone mount if my 2025 Civic hybrid had a “normal“ vent design because there are some awesome and affordable MagSafe vent mounts out there. While I love the look of the Honda Civic and CRV honeycomb vents, you cannot use a vent mounted phone mount. Amazon had a few choices including one that clipped onto the edges of the vent and one that went around the infotainment screen. I ordered a couple of those to see if they would work. Unfortunately I found that they either involved adhesive or flimsy tiny plastic clips that would most likely not last through repeatedly taking my phone off and on the strong MagSafe mount. Another problem (besides flimsiness) with the vent mount idea is that it put the phone up too high blocking my infotainment screen. I went onto Reddit to see what other civic owners were using and came across OFFROAM which I had never heard of before. While this is a great option for many reasons, I couldn’t imagine paying that much money for a phone phone, especially compared to other options out there. But after ordering a few cheaper options on Amazon and not finding one that worked for where I wanted to mount my phone, I decided to give it a try based on the awesome reviews I saw on Reddit and their website.
Once I received the item, I realized it was super well-made heavy duty aluminum. I immediately saw the quality differences before even attempting to install it.
I looked at the install directions and used the QR code to see the install video as well. I did run into one problem when I was attempting to mount it using their instructions. I wasn’t able to drop the top part of the clip (where it slides between the honeycomb vent and trim), the bottom clip wasn’t clearing the trim and I didn’t want to risk scratching it. I’m not sure if this was “user error“ on my part but I was incredibly patient and just wasn’t able to get that top clip flat against the vent. After a little frustration I decided to try installing it the opposite way from their directions. First of all I opened the mount as wide as I could without the screws falling out and then pushed in the bottom clip first. This worked perfectly as it allowed the top clip to lay flat against the honeycomb vent and drop right in after using the small provided pry tool. I know many people will probably be afraid to purchase this after seeing an installation diagram using a pry tool, but trust me this is SUPER SIMPLE and because it doesn’t use any adhesive, it won’t damage your vehicle.
I took pictures from multiple angles to show how it looks installed in the vehicle.
The only things I would change if I could are:
-I would definitely prefer the wing nut to be smaller. I understand that it is probably sized that way for ease of adjustment, but you really only need to adjust it once. I much prefer a smaller and sleeker nut that would better match the simplistic design of the mount.
- I wish the protective padding under the mount was black (like the mount and the trim color) instead of red. I have no idea why they would choose red. I only see it if I look at the side of the mount, but still it’s a subtle thing that would definitely improve the overall look.
Bottom line is this is definitely a great value and I would recommend it to anyone!

Without a doubt, this is the cleanest phone mount I've ever owned. It integrates into the environment perfectly and provides a stable platform for a cellular device

This is a very heavy duty and well made product. Everything was as expected and am completely happy with the product

The product was the good quality and easy to install

I found this phone mount to be of high quality and functionality

High quality

I have these mounts in my Tacoma and 4Runner and they are the best. I was not disappointed with the amount for the CRV, it is just as good and sturdy and as all their products do look amazing in the vehicle.

Very excellent, I liked and exceeded the perceptions, thank you.

I’m very particular about my new car. I love it, but there is nowhere adequate to put my phone. The cup holders are too far back and there’s no space in the center console area for a phone. I don’t care for suction cups or adhesives and can’t stand phone holders that attach to air vents because they pull down the vent and block air flow. The Offroam holder is perfect. The base is tailor-made for my BRZ and secured firmly above the air vent. I opted for the mag safe version and it looks like came with the car. It blends in so well. It holds my phone snugly even with a case. Shipping and service were quick. They even answered my questions after hours. I could not be happier with my experience with Offroam and my phone holder.

Read several reviews that the magnet is not strong on this version and that is absolutely NOT true. I’ve got three of OffRoam’s setups, this one, the MagSafe non-charging and the spring clamp. This one is as strong if not stronger than the non-charging model. I’ve got both and use them off road in a 5th Gen 4Runner.

I think I know what might be the issue. Wonder if those who are having problems with the magnets are using cases on their phones that are not MagSafe, meaning they don’t have magnets in the case as well so the mount is trying to hold onto the phones magnet through a case which would not be strong enough, nothing would be.

So order with confidence, it’s easy to use, charges when stuck in and holds as strong as anything you need it for, as long as you’re using a MagSafe case with magnets in it.

The car mount to get. Say good bye to flimsy plastic car mounts!

I read a bunch of reviews and decided to get the phone mount. It's solid and I know I won't need to ever replace it. I keep my cars from 10-12 years and I definitely see this phone mount lasting that long. I'd be shocked if it didn't. Thank you for making a quality product in an age of disposable objects.

While I comprehended the instructions I found it hard to believe that the tight seam needed to be separated in order for the upper left side of the mount to go into the gap created. I hesitated but finally relented and attempted to use the tool provided. Unfortunately the seam was too tight and I wound up using a wood chisel to separate. Finally, the mount was installed successfully. I have tried many, many iPhone mount solutions but this is definitely the best of the best.

Before I got the item I was concerned that the location of the phone mount would cover the screen of the car. However, I found that when the phone is vertical it doesn't cause any issue and when horizontal it only covers a small corner. It does cause my phone to cover the volume dial, but I typically use the volume dial on the steering wheel so this isn't an issue for me. The magnet is just the right strength and it hasn't dropped my phone once, but I haven't been off road with it yet. The install is very easy and the mount doesn't slip at all. It was the right purchase to hold my iphone with a case hands down.

I've been using the vent mount in my Jeep for about a month now, and it is the sturdiest mount I have tried to date. It doesn't budge, I can still use the vent and my phone angle stays exactly where I want it. I would recommend this product.